Manufacturing method of injection mold for mobile phone case

At present, in the production of mobile phones, the production process of the mobile phone case is many and complicated, and a mobile phone case with a better quality can improve the overall appearance quality and the tactile feeling of the mobile phone. The mobile phone case is made by injection molding, machining, etc., of which injection molding is the first process and an important process, which is related to the internal quality of the mobile phone case.

asdadad

The casing injection mold can perform injection molding of multiple products at the same time. In the injection molding project, the lower mold can be heated and kept warm to avoid the unsatisfactory injection effect caused by the cooling of the injection material. When the material is filled with the injection mold, it can gradually cool down slowly, injection molding effect is good.

An injection mold for a mobile phone case, including a lower mold and an upper mold, a controller is installed on the front side of the lower mold, a display screen is installed on one side of the controller, and function keys are installed on the other side of the controller, and the lower mold is installed. A fixing frame is installed on both sides, a fixing bolt is installed on the upper end of the fixing frame, a matching groove is arranged on both sides of the upper end of the lower mold, an injection mold is arranged in the middle of the upper end of the lower mold, and an injection mold is arranged between the injection molds. There is an injection channel, a temperature sensor is installed on the upper end of the lower mold, an internal cavity is arranged inside the bottom of the lower mold, a heater is installed on the top of the inner cavity, and a pouring port is installed on the upper end of the upper mold. A riser is installed on the other side of the upper end of the upper mold, matching protrusions are installed on both sides of the lower end of the upper mold, and an injection molding punch is arranged in the middle of the lower end of the upper mold.

Media Contact
Company Name: Aojie Mould Co.,Ltd.
Email: Send Email
Country: China
Website: https://www.cnajmould.com/