Introduction of FK808 Bottle Neck Labeling Machine

FK808 Bottle Neck Labeling Machine

bottle neck labeling machine

With the continuous progress of people’s times, people’s aesthetic is getting higher and higher, and the aesthetic requirements of products are getting higher and higher. Many bottles and cans of high-end food are now required to labeling label at the bottle neck,Especially if the color of the food is relatively inaesthetic. Because the neck of each bottle is a lot of taper, or even the middle is slightly raised, As a result, labeling with standard machines in the past often performed poorly, Or wrinkle or skew, So people need to add some extra structure to make the machine more stable.

Thanks to our excellent technical team, they perfected the machine in only five days. A new adjustment shelf that can be moved and adjusted in all directions was added to the original adjustment shelf and add a new cylinder that use to fix product. After a large number of products tested, verify that the machine performance improved by our technical team is excellent, the machine is very stable, whether the bottle neck is small ova, have a very large taper or the material is very soft, this machine can be labeling well. And the number of labeling per minute does not decrease but increases.

Mechanical parameters

1. The machine labeling speed: (20~45 PCS /min).

2.Standard machine suitable for product size: (diameter 25mm~120mm, 3.high :25~150mm, if beyond the scope of the need to customize).

4. Labeling accuracy: ±1mm).

5.Machine size: L*W*H; 1950*1200*1450mm).ults.

Bottle neck label not good labeling? Manual labeling is too slow? Filling volume is always unstable? Slow productivity? Contact Fineco to solve all labeling and filling problems.

Media Contact
Company Name: Guangdong Fineco Machinery Group Co., Ltd.
Email: Send Email
Phone: 008613207778127
Country: China