There is process of how to inspection before cutting when people get a new metal laser cutting machine:

1. Inspection before processing

Check whether the power supply line in the control cabinet is loose
Inspect the lathe bed, laser source, water chiller, air compressor, exhaust fan
Inspect the cylinder and pipeline, gas valume
Clean up the objects on the lathe bad and peripheral equipment that had danger risk on the cutting
Inspect the exchangeable platform and the lubrication rail
Gas supply test
Place receiver car
Gas inspection for work-lifter
Chuck inspection
Power supply testing

2. Start fiber laser cutting machine

Switch on Start up breaker
Switch on the computer host and open software
Switch on the water chiller
Switch on the laser source
Switch on exhaust fan
Switch on air compressor
check the normal running of the exchangeable platform
check the red light indication

3. Operation of fiber laser cutter

Go origin
Switch the nozzle
Place the sheet plate or tube plate
Observe the concentric following
Open the cylinder
Check the red light indication
Adjust red light center
Calibration and edge-seek
Choose the cutting size of graphics

4. Setting of cutting paramters of metal sheet laser cutting machine

Simulation
frame
parameters adjustment
focal length adjustment
air blowing
pulse
cutting

5. How to close fiber laser cutting machine

Shut off the air cylinder
Shut off laser source
Shut off water chiller
Shut off the software (move the laser head to the middle of lathe bed)
turn off the computer host
Shut off breaker
clean up the machine

Media Contact
Company Name: Jinan Knoppo Automation Equipment Co., Ltd.
Email: Send Email
Phone: 0086-18663717059
Address:2-804, Fenghuang road
City: Jinan
State: Shandong
Country: China
Website: https://www.cncmetalcutter.com/