Hmb 180 Degree Hydraulic Tilt Rotator Quick Hitch Coupler For Excavator

HMB Newly designed excavator tilt hitch makes your excavator attachments have instant tilt capability, which can be completely tilted 90 degrees in two directions, suitable for excavators from 0.8 tons to 25 tons.

It can help customers realize the following applications´╝Ü

1. Dig level foundations without having to level the machine tracks.

2. Reduce waste and manual labor when filling pea gravel around pipes and manholes.

3. Carry out rock breaking at the sides of deep trenches where standard couplers can’t reach.

4. Expand the working envelope of the machine when hedge or brush cutting.

5. Ability to reverse buckets to allow the operator to excavate against walls and under pipes.

Advantges:

• Tilt any bucket or attachment up to 180 °

• No Exposed Cylinders

• Variable pin centre design

• Proven technology exceeds current safety standards

Safety & Versatility

Safety

• Front & Rear Safety Locks backed up by two powerful springs which retains the attachment rear pin in case of cylinder failure

• Powerful spring activated safety locks work in all dirty environments unlike gravity systems

Versatility

• Dig level foundations without having to level the machine tracks

• Carry out landscaping with minimum disruption to the ground

• Reduce waste and manual labour when filling pea gravel around pipes and manholes

• Carry out rock breaking at the sides of deep trenches where standard couplers can’t reach

• Expand the working envelope of the machine when hedge or brush cutting

• Ability to reverse buckets to allow the operator to excavate against walls and under pipes

original source: https://www.hmbhydraulicbreaker.com/news/hmb-180-degree-hydraulic-tilt-rotator-quick-hitch-coupler-for-excavator/

Yantaijiwei : Top Hydraulic Shear For Your Fleet

Excavator hydraulic shears are widely used in steel structure demolition, scrap steel recycling, automobile dismantling and other industries.It is a wise choice to choose the appropriate hydraulic shear according to your own working conditions.

However,there are many types of hydraulic shears,such as olecranon shears, double-cylinder shears,car demolition shears,etc.

No.1 Double Cylinder Hydraulic Shear

As the name suggests,it is a hydraulic shear with two oil cylinders.It has a wide range of uses,mainly for crushing and demolition of houses, chemical equipment,etc.Generally, high-strength wear-resistant plates are used for the shear,which has high machining accuracy and is not easy to deform.

The two scissor boards have synchronizing devices, which make the shear open and close synchronously and powerfully.The excavator’s hydraulic shear can rotate 360 degrees, improving work efficiency.

No.2 Single Cylinder Hydraulic Shear

In construction sites, single-cylinder hydraulic shears are often used.

It has the following features: static crushing, no vibration, ensuring structural safety; no dust, no noise, small broken pieces are easy to clean and transport.

No.3 Eagle Shear

The eagle Shear is a heavy-duty hydraulic shear installed on the excavator. Its unique design and innovative method ensure efficient operation and powerful cutting force, which exceeds the performance of ordinary hydraulic shears by 15% and is one of the largest shearing forces among excavator hydraulic shears.

It is suitable for the treatment of sheared steel bars, steel plates, steel materials, tanks, pipes, etc.

It is characterized by easy movement, flexible use on any occasion, high speed, high efficiency, high safety, and more in line with environmental protection requirements.

No.4 Car Dismantling Shears

The excavator car dismantling shear is mainly used for dismantling scrapped cars and cutting car frames.

They can rotate 360 degrees. With the special press frame, it is more convenient for the shear to dismantle large and small scrapped cars and save labor costs. It is an essential machine for car dismantling plants.

Excavator car dismantling shears have high work efficiency, high safety factor, and long-term return on one-time investment. It is a new working tool in the scrap car recycling and dismantling industry.

It is suitable for the treatment of sheared steel bars, steel plates, steel materials, tanks, pipes, etc.

It is characterized by easy movement, flexible use on any occasion, high speed, high efficiency, high safety, and more in line with environmental protection requirements.

original source: https://www.hmbhydraulicbreaker.com/news/yantaijiwei-top-hydraulic-shear-for-your-fleet/

Media Contact
Company Name: Yantai Jiwei Construction Machinery Equipment Co., Ltd.
Email: Send Email
Phone: 86-535-6536726
Country: China
Website: https://www.hmbhydraulicbreaker.com/