Learn everything you need to know about industrial clamps. The types of clamps, their uses, and expert advice on choosing the right one for safety and efficiency can be found here. Sinsun manufactures clamps that are highly precise.
There are many complex things to make, put together, and construct, but the clamp is a hero. When you weld, glue, machine, or assemble things together, this is the most crucial tool that holds everything together.You could end up with misalignment, poor product quality, safety risks, and costly downtime if you choose the wrong clamp.
At Sinsun, we manufacture fastening solutions with precision. It is essential for the integrity of engineering to use the correct clamping force and apply it correctly. It will show you how to use industrial clamps, why they’re important, and what you need to look for when selecting them.
Uses of different kinds of pipe clamps
Pipe clamps are special tools that hold, support, guide, or protect pipes in plumbing, construction, and industrial systems. Choosing the right pipe clamp depends on the material, the job it needs to do, the environment, and the load it needs to support. These are the main types.
It can be used for light-duty support and holding of small pipes, tubes, or cables. Usually made of plastic (nylon) or metal (steel, stainless steel).
The main purpose of this product is to support and hold small pipes, tubes, or cables. There is usually no vibration associated with light plumbing, electrical work, and internal equipment.
2. Double Bolt Pipe Clamp
The Double Bolt Pipe Clamp features a two-bolt closure mechanism, providing a more even and secure clamping force around the full circumference of the pipe.
Primary Applications: The Double Bolt Pipe Clamp is used for general-purpose pipe fixing for standard water, air, and process lines. It is commonly used in HVAC, industrial plumbing, and shipbuilding. It offers better vibration resistance and holding strength than single-bolt types.
3. U-Bolt Clamp
Description: Consists of a U-shaped bolt threaded at both ends, used with a saddle (base plate) and two nuts. The pipe rests directly in the U.
Primary Applications: Rigid anchoring of pipes to beams, channels, or walls. It is commonly used in outdoor and structural applications, such as for supporting utility pipes. Can cause point loads and require insulation to prevent galvanic corrosion on the pipe.
4. Malleable Iron Pipe Clamp (M.I. Clamp)
This is a two-piece clamp made of malleable cast iron that is heavy-duty. It bolts together around the pipe and is attached to a structure via an integral mounting hole.
Supporting heavy pipes in demanding environments is the primary application.The strength and durability of this material make it a popular choice for fire protection (sprinkler systems), industrial process piping, and power plants.
5. Saddle Clamp
Description: A shaped bracket or saddle that holds the pipe from below and is held in place by straps or bolts on top.
Main Uses: Holding up heavy or large-diameter pipes where full circumferential clamping isn’t needed or isn’t possible. Commonly used for drainage pipes, big pipes, and building structures.
6. Clamp for Riser Pipe
Description: A strong clamp made just for vertical pipe runs, or risers. Usually has a built-in guide or bracket that lets the object move up and down while also letting it expand and contract along its length.
Main uses: holding and guiding vertical pipes in tall buildings (for plumbing, fire sprinklers). Controls the weight load (pipe sag) and the movement of heat.
7. Clamp for the Beam
This is not a clamp for the pipe itself, but rather a tool to hold things together. It connects directly to the flange of an I-beam or channel, providing a quick place to mount a threaded rod, which can then be attached to a regular pipe clamp.
Main Uses: Making pipe support points on structural steel without having to drill or weld. It is necessary for installing modular and flexible piping in factories and on construction sites.
Five Important Things to Think About When Choosing the Right Clamp
When choosing the best clamp, size is not the only thing to consider. This is a guide to choosing the right clamp.
What is the necessary pressure for clamping? Different tools are needed for light holding and heavy-duty welding.
Throat Depth and Jaw Opening: Does the clamp need to go over the workpiece? How far does it need to go?
Protection of Materials and Surfaces: Will the clamp jaws damage the material? For fragile surfaces, consider using protective pads or special clamps.
Where will it be used? In a workshop, on a dusty construction site, or on an automated production line? This affects how long it will last and what type it is (manual or pneumatic).
Frequency of Use: For daily use, buy clamps that are professional-grade and will last a long time. A standard model might be enough for occasional use.
Sinsun: Your Partner for Engineered Fastening and Fixturing Solutions
At Sinsun, the most important aspect of what we do is making sure everything is securely fastened. For the safety and longevity of the final product, finding the right clamp and the right fastener is crucial.
In addition to our expertise in precision manufacturing and material science, we have a deep understanding of force, stress, and holding power. It’s not just parts that we sell; we offer engineered solutions as well.
Are you looking for a special fastener for your production fixture or clamping assembly? OIt is our engineering team’s goal to design and manufacture parts that are extremely strong and meet the exact requirements of your most demanding applications.
Media Contact
Company Name: Tianjin Sinsun Imp & Exp Co., Ltd.
Email: Send Email
Country: China
Website: https://www.sinsunfastener.com/