{"id":826620,"date":"2026-07-24T18:17:02","date_gmt":"2026-07-24T18:17:02","guid":{"rendered":"https:\/\/www.abnewswire.com\/pressreleases\/?p=826620"},"modified":"2026-07-24T18:17:02","modified_gmt":"2026-07-24T18:17:02","slug":"what-middle-east-hvac-contractors-verify-before-ordering-wire-tube-condensers-for-desert-climate-installations","status":"publish","type":"post","link":"https:\/\/www.abnewswire.com\/pressreleases\/what-middle-east-hvac-contractors-verify-before-ordering-wire-tube-condensers-for-desert-climate-installations_826620.html","title":{"rendered":"What Middle East HVAC Contractors Verify Before Ordering Wire Tube Condensers for Desert Climate Installations"},"content":{"rendered":"<ul style=\"text-align: justify;\">\n<li>Verify tube material is rolling-welded steel in the 4.76 to 8 mm diameter range for reliable brazing and pressure tolerance.<\/li>\n<li>Confirm low carbon steel wire diameter is between 1.2 and 1.6 mm with wire pitch of at least 5 mm for adequate airflow in dusty environments.<\/li>\n<li>Request electrophoretic paint anti-corrosion coating to achieve up to 50 percent longer service life in coastal and high-humidity zones.<\/li>\n<li>Ensure compatibility with R134a, R404a, or R22 refrigerants depending on your system design and local regulations.<\/li>\n<li>Check that the manufacturer holds ISO 9001 certification and can provide material test reports per shipment.<\/li>\n<li>Confirm the condenser structure type matches the installation: flat type for back mounting, bended or spiral type for bottom mounting, or wrapped tube embed on plate.<\/li>\n<li>Expect 15 to 20 percent energy savings and 30 percent higher heat dissipation when sourcing quality wire tube condensers for desert climate systems.<\/li>\n<\/ul>\n<p style=\"text-align: justify;\">Why Wire Tube Condenser Selection Matters More in the Middle East<\/p>\n<p style=\"text-align: justify;\">The Middle East presents one of the most demanding operating environments for HVAC and refrigeration equipment anywhere in the world. Ambient temperatures routinely exceed 50 degrees Celsius during summer months in cities like Riyadh, Dubai, and Doha. Add airborne sand, high UV exposure, and in coastal areas elevated humidity and salt content, and the margin for component selection error narrows considerably.<\/p>\n<p style=\"text-align: justify;\">For HVAC contractors working on commercial refrigeration, cold storage, and air conditioning projects across the Gulf Cooperation Council region, the wire tube condenser is a critical component that directly affects system efficiency, maintenance frequency, and long-term operating costs. Unlike standard plate or finned tube condensers, wire tube designs offer a favorable balance of heat dissipation efficiency, compact form factor, and cost effectiveness. However, not all wire tube condensers are manufactured to withstand the specific stresses of desert climate operation.<\/p>\n<p style=\"text-align: justify;\">This article provides a structured verification framework that experienced contractors use when evaluating wire tube condensers from manufacturers. Every specification listed here reflects real product data from condensers that have been deployed in Middle East projects, with particular focus on the technical parameters that separate adequate performance from reliable, long-term operation.<\/p>\n<p style=\"text-align: justify;\">Material Composition: Steel Tube Diameter, Wire Gauge, and Plate Specification<\/p>\n<p style=\"text-align: justify;\">The foundation of any wire tube condenser is its raw material composition. For Middle East applications, contractors should verify three critical material specifications before placing an order.<\/p>\n<p style=\"text-align: justify;\">Steel tubes should be rolling-welded construction in the range of 4.76 mm to 8 mm outer diameter. This range covers the standard bore sizes used in commercial refrigeration and air conditioning circuits across the region. Rolling-welded construction ensures a continuous metallurgical bond between the tube and the wire wraps, which is essential for efficient heat transfer from refrigerant to the dissipation surface. Tubes outside this diameter range may indicate the product is designed for a different application segment and could present brazing compatibility issues with standard Middle East system fittings.<\/p>\n<p style=\"text-align: justify;\">Low carbon steel wire in the 1.2 to 1.6 mm diameter range provides the optimal balance between heat transfer surface area and structural rigidity. Thinner wire increases surface area but risks deformation under vibration or during sandstorms. Thicker wire reduces the effective surface area per unit length. The 1.2 to 1.6 mm specification has proven effective across a wide range of desert installations where mechanical durability is as important as thermal performance.<\/p>\n<p style=\"text-align: justify;\">SPCC steel plate in 0.6 to 2.0 mm thickness serves as the structural backbone of the condenser assembly. SPCC is a cold-rolled carbon steel grade known for consistent surface finish and dimensional accuracy. For Middle East installations, plate thickness within this range ensures the condenser maintains its shape under thermal cycling stress, which is more extreme in desert climates due to the large temperature differential between daytime operation and nighttime cooling.<\/p>\n<p style=\"text-align: justify;\"><img decoding=\"async\" src=\"https:\/\/ecdn6.globalso.com\/upload\/p\/3544\/image_other\/2025-04\/111_.jpg\" alt=\"Taojun wire tube condenser for Middle East HVAC applications showing steel tube and wire construction\" \/><\/p>\n<p style=\"text-align: justify;\">Wire tube condenser assembly showing rolling-welded steel tubes and low carbon steel wire construction suitable for desert climate HVAC installations. Anti-Corrosion Treatment: The Single Biggest Differentiator for Desert and Coastal Use<\/p>\n<p style=\"text-align: justify;\">In the Middle East, corrosion is not limited to coastal installations. Desert environments introduce fine alkaline sand particles that, when combined with occasional humidity spikes, create a chemically aggressive surface environment. Contractors who have managed service calls across the region consistently report that anti-corrosion coating quality is the single most important factor in determining whether a wire tube condenser delivers its rated service life or fails prematurely.<\/p>\n<p style=\"text-align: justify;\">The specification to verify is electrophoretic paint anti-corrosion coating. Electrophoretic deposition, also known as e-coating, applies a uniform paint film across the entire condenser surface, including areas that are difficult to reach with conventional spray painting such as the tube-to-wire junctions and the interior surfaces of wire wraps. This uniform coverage is critical because corrosion typically initiates at points where coating coverage is inconsistent.<\/p>\n<p style=\"text-align: justify;\">Condensers with properly applied electrophoretic paint coatings demonstrate up to 50 percent longer service life compared to untreated or conventionally painted alternatives. For a contractor specifying equipment for a 15-year cold storage facility in Jeddah or a 20-year commercial kitchen in Abu Dhabi, this difference translates directly into fewer replacement cycles and lower total cost of ownership for the building operator.<\/p>\n<p style=\"text-align: justify;\">When evaluating a supplier, request documentation of the e-coating process parameters including bath chemistry, voltage, immersion time, and post-cure temperature. Reputable manufacturers will provide this information along with salt spray test results that demonstrate corrosion resistance performance under accelerated aging conditions.<\/p>\n<p style=\"text-align: justify;\">Refrigerant Compatibility: R134a, R404a, and R22 Coverage<\/p>\n<p style=\"text-align: justify;\">Refrigerant selection in the Middle East is influenced by both system design requirements and evolving regulatory frameworks. While the region has historically relied heavily on R22 for air conditioning and refrigeration, the phasedown under the Montreal Protocol is driving adoption of R134a and R404a in new installations. Contractors need wire tube condensers that are validated for use with all three refrigerants to maintain flexibility across project types.<\/p>\n<p style=\"text-align: justify;\">The critical verification point is whether the condenser manufacturer has tested their product with each specific refrigerant under operating conditions representative of Middle East ambient temperatures. A condenser that performs adequately with R404a at 35 degrees Celsius ambient may exhibit different pressure characteristics and heat transfer rates at 50 degrees Celsius. Request performance data sheets that include capacity ratings at elevated ambient temperatures, not just standard rating conditions.<\/p>\n<p style=\"text-align: justify;\">Tube internal cleanliness is another factor that affects refrigerant compatibility. The specification to verify is residual moisture content of 5 mg per 100 cubic centimeters or less, residual impurity of 10 mg per 100 cubic centimeters or less, and residual mineral oil of 100 mg per 100 cubic centimeters or less. These internal cleanliness parameters prevent chemical reactions between contaminants and refrigerants that can generate acids, sludge, and other degradation products that compromise system performance over time.<\/p>\n<p style=\"text-align: justify;\">Additionally, residual chlorine content should be 5 Mo ppm or less. Elevated chlorine levels indicate inadequate cleaning during the manufacturing process and can cause stress corrosion cracking in copper-to-steel brazed joints, which is a failure mode that is accelerated by the high operating pressures typical of Middle East desert climate systems.<\/p>\n<p style=\"text-align: justify;\">Structure Types: Matching Condenser Configuration to Installation Requirements<\/p>\n<p style=\"text-align: justify;\">Wire tube condensers are manufactured in several structural configurations, and selecting the correct type for the installation geometry is a verification step that experienced contractors never skip. The three primary structure types and their typical applications are as follows.<\/p>\n<p style=\"text-align: justify;\">Flat Type (Back Mounting)<\/p>\n<p style=\"text-align: justify;\">Flat type condensers are designed for vertical rear-panel mounting, typical in household refrigerators, upright freezers, and some commercial display cases. The flat geometry allows the condenser to sit flush against the unit back panel, with natural convection airflow across the wire surface. In Middle East installations where ambient temperatures are high, natural convection efficiency drops, so contractors should verify that the flat type condenser specified has adequate surface area margin to compensate for reduced convective driving force at elevated ambient temperatures.<\/p>\n<p style=\"text-align: justify;\">Bended or Spiral Type (Bottom Mounting)<\/p>\n<p style=\"text-align: justify;\">Bended or spiral type condensers are configured for horizontal bottom mounting, commonly found in chest freezers and under-counter refrigeration units. The spiral or bent tube geometry maximizes surface area within a compact footprint. For Middle East commercial kitchen and cold room applications, bottom-mounted condensers are exposed to rising warm air from the floor level, which can be significantly hotter than ambient in ground-floor installations on concrete slabs that absorb and re-radiate solar heat throughout the day.<\/p>\n<p style=\"text-align: justify;\">Wrapped Tube Embed on Plate<\/p>\n<p style=\"text-align: justify;\">This configuration bonds the wire tube assembly directly onto a steel plate, creating a panel-style condenser that can be integrated into the equipment chassis. The embedded design provides additional structural rigidity and can improve heat transfer to the mounting surface. For large commercial cold storage installations in the Middle East, wrapped tube embed designs offer advantages in terms of installation speed and structural integrity under the vibration loads associated with compressor operation in high-ambient-temperature conditions.<\/p>\n<p style=\"text-align: justify;\">Performance Verification: Heat Dissipation, Energy Savings, and Service Life Data<\/p>\n<p style=\"text-align: justify;\">Contractors evaluating wire tube condensers for Middle East projects should request specific performance data rather than relying on general product descriptions. The following benchmarks, drawn from verified product specifications, provide a baseline for comparison.<\/p>\n<table>\n<thead>\n<tr>\n<th>Performance Metric<\/th>\n<th>Specification<\/th>\n<th>Relevance to Middle East<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Heat dissipation improvement<\/td>\n<td>30 percent higher than ordinary condensers<\/td>\n<td>Critical for maintaining cooling capacity at 50+ degrees Celsius ambient<\/td>\n<\/tr>\n<tr>\n<td>Service life extension<\/td>\n<td>50 percent longer with electrophoretic paint<\/td>\n<td>Reduces replacement frequency in harsh desert and coastal environments<\/td>\n<\/tr>\n<tr>\n<td>Energy savings<\/td>\n<td>15 to 20 percent reduction in compressor workload<\/td>\n<td>Significant impact on electricity costs in regions with high cooling hours<\/td>\n<\/tr>\n<tr>\n<td>Residual moisture<\/td>\n<td>5 mg per 100 cm cubed or less<\/td>\n<td>Prevents acid formation with R134a and R404a at high operating pressures<\/td>\n<\/tr>\n<tr>\n<td>Residual impurity<\/td>\n<td>10 mg per 100 cm cubed or less<\/td>\n<td>Ensures clean refrigerant circuit and reduces <a rel=\"nofollow\" class=\"anchor_47ae9ec4c0978a1293d1030e30034b8a\" title=\"valve\" href=\"https:\/\/www.taojunhvac.com\/valve-1\/\" target=\"_blank\">valve<\/a> and filter blockage risk<\/td>\n<\/tr>\n<tr>\n<td>Residual mineral oil<\/td>\n<td>100 mg per 100 cm cubed or less<\/td>\n<td>Maintains refrigerant purity and system efficiency over extended operation<\/td>\n<\/tr>\n<tr>\n<td>Residual chlorine<\/td>\n<td>5 Mo ppm or less<\/td>\n<td>Prevents stress corrosion cracking at brazed joints under high pressure<\/td>\n<\/tr>\n<tr>\n<td>Wire pitch<\/td>\n<td>5 mm or greater<\/td>\n<td>Allows airflow through dust accumulation and simplifies field cleaning<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p style=\"text-align: justify;\">The 30 percent improvement in heat dissipation is particularly relevant for Middle East installations because the condenser must reject heat against a much higher temperature differential between the refrigerant and the ambient air. According to <a rel=\"nofollow\" href=\"https:\/\/www.ashrae.org\/\" rel=\"noopener\" target=\"_blank\">ASHRAE standards and guidelines<\/a>, condenser performance at elevated ambient temperatures is a critical design factor for systems operating in climate zones with design-day temperatures above 45 degrees Celsius, which includes most of the Arabian Peninsula.<\/p>\n<p style=\"text-align: justify;\">The International Electrotechnical Commission (IEC) publishes international standards for electrical safety in HVAC equipment, including requirements for components exposed to extreme ambient temperatures. Contractors specifying wire tube condensers for desert installations should verify that their suppliers&#8217; products meet relevant IEC standards for thermal cycling resistance and electrical insulation integrity under high-temperature operating conditions.<\/p>\n<p style=\"text-align: justify;\">The 15 to 20 percent energy savings figure deserves careful interpretation. This range represents the reduction in compressor energy consumption attributable to lower condensing pressures, which result from more efficient heat rejection at the condenser. In a region where air conditioning can account for 60 to 70 percent of building electricity consumption during peak summer months, even a 15 percent improvement in condenser efficiency produces meaningful operating cost reductions over the equipment lifecycle.<\/p>\n<p style=\"text-align: justify;\">Quality Management and Certification Requirements<\/p>\n<p style=\"text-align: justify;\">For Middle East projects, particularly those involving government buildings, hospitals, food processing facilities, and large commercial developments, the wire tube condenser manufacturer must demonstrate a formal quality management system. The minimum requirement is ISO 9001 certification, which ensures that manufacturing processes are documented, controlled, and subject to regular third-party audits.<\/p>\n<p style=\"text-align: justify;\">Beyond the ISO 9001 baseline, contractors working on projects in specific Middle East markets should verify compliance with local requirements. Saudi Arabia, for example, has SASO (Saudi Standards, Metrology and Quality Organization) requirements for imported HVAC components. The UAE has Emirates Authority for Standardization and Metrology (ESMA) regulations. Qatar applies its own Qatar Standards (QS) framework. Understanding the specific compliance pathway for each project jurisdiction is part of the contractor due diligence process.<\/p>\n<p style=\"text-align: justify;\">A manufacturer with a long operational history provides additional assurance of process maturity. Ningbo Taojun Refrigeration Equipment Co., Ltd., founded in 1988, brings 38 years of wire tube condenser manufacturing experience. This depth of production history means the manufacturing processes have been refined through multiple generations of product improvement and have been validated across diverse operating environments including Middle East desert climates.<\/p>\n<p style=\"text-align: justify;\">When vetting a new supplier, contractors should request copies of current ISO 9001 certificates, recent third-party inspection reports, and references from other Middle East projects. A manufacturer that cannot or will not provide this documentation should be considered a higher-risk source regardless of pricing advantages.<\/p>\n<p style=\"text-align: justify;\">Installation Considerations for Desert Climate Environments<\/p>\n<p style=\"text-align: justify;\">Specifying the correct wire tube condenser is only half the equation. Proper installation practices are equally important for achieving the expected performance and service life in Middle East conditions. The following installation considerations are based on field experience across multiple Gulf states.<\/p>\n<p style=\"text-align: justify;\">Airflow management.In high-ambient-temperature environments, the condenser relies on adequate airflow to reject heat effectively. Even wire tube condensers with 30 percent higher heat dissipation capability will underperform if installed in an enclosure with restricted ventilation. Contractors should verify that the installation location provides unobstructed airflow paths and that any forced-air fans are rated for the local ambient temperature. Fan Motors that are rated for 40 degrees Celsius ambient will experience accelerated insulation degradation and bearing failure when operated continuously at 50 degrees Celsius.<\/p>\n<p style=\"text-align: justify;\">Sand and dust mitigation. The wire pitch specification of 5 mm or greater is designed to allow sand and dust to pass through the condenser rather than accumulating on the surface. However, in regions with frequent sandstorms, even a 5 mm pitch will eventually experience buildup. Contractors should design the installation to facilitate periodic cleaning without requiring equipment disassembly. Accessible condenser mounting and provision for compressed air or low-pressure water washing should be included in the installation scope of work.<\/p>\n<p style=\"text-align: justify;\">Corrosion protection at installation points. The electrophoretic paint coating protects the condenser surface, but any damage to the coating during installation, such as scratches from mounting brackets or abrasion from contact with sharp edges, creates vulnerability points. Contractors should use rubber or plastic isolators at all mounting contact points and verify that the coating is intact after installation is complete.<\/p>\n<p style=\"text-align: justify;\">Thermal expansion accommodation. Desert climate installations experience extreme thermal cycling, with daytime temperatures exceeding 50 degrees Celsius and nighttime temperatures dropping to 20 degrees Celsius or below, depending on the season and location. This 30-plus degree daily temperature swing causes repeated expansion and contraction of the condenser assembly. Installation must allow for thermal movement without creating stress concentrations at tube bends or mounting points.<\/p>\n<p style=\"text-align: justify;\">The ASHRAE Standard 15 on safety standards for refrigeration systems provides guidance on component installation that is applicable to wire tube condenser mounting in commercial applications. Contractors should ensure that their installation practices align with the relevant provisions of this standard.<\/p>\n<p style=\"text-align: justify;\">Procurement Checklist for Middle East HVAC Contractors<\/p>\n<p style=\"text-align: justify;\">The following checklist consolidates the verification points discussed throughout this article into a practical procurement tool. Contractors can use this checklist when evaluating wire tube condenser quotations from any manufacturer.<\/p>\n<ol style=\"text-align: justify;\">\n<li>Tube material and construction: Confirm rolling-welded steel tubes in the 4.76 to 8 mm diameter range. Request material certificates.<\/li>\n<li>Wire specification: Verify low carbon steel wire diameter of 1.2 to 1.6 mm with wire pitch of 5 mm or greater.<\/li>\n<li>Plate material: Confirm SPCC steel plate in 0.6 to 2.0 mm thickness.<\/li>\n<li>Anti-corrosion coating: Verify electrophoretic paint application. Request salt spray test data.<\/li>\n<li>Refrigerant compatibility: Confirm testing with R134a, R404a, or R22 as applicable to your project. Request performance data at elevated ambient temperatures.<\/li>\n<li>Internal cleanliness: Verify residual moisture, impurity, mineral oil, and chlorine levels meet specified limits.<\/li>\n<li>Structure type: Confirm the condenser configuration (flat, bended\/spiral, or wrapped tube embed) matches the installation geometry.<\/li>\n<li>Certification: Request current ISO 9001 certificate and any applicable local compliance documentation.<\/li>\n<li>Manufacturer experience: Verify production history and request Middle East project references.<\/li>\n<li>Standardized interfaces: Confirm that connection fittings are compatible with your system design and that standardized interfaces are provided for maintenance access.<\/li>\n<\/ol>\n<p style=\"text-align: justify;\">This checklist is not exhaustive, but it covers the verification points that distinguish a well-specified wire tube condenser from one that may underperform or fail prematurely in Middle East desert climate conditions. As noted by UNEP&#8217;s cooling initiatives, the rapid growth of cooling demand in hot climates makes component efficiency and durability increasingly important for both economic and environmental reasons.<\/p>\n<p style=\"text-align: justify;\">Frequently Asked Questions<\/p>\n<p style=\"text-align: justify;\">What is the maximum ambient temperature a wire tube condenser can handle in the Middle East?<\/p>\n<p style=\"text-align: justify;\">Wire tube condensers designed for desert climates should operate reliably at ambient temperatures up to 55 degrees Celsius. Electrophoretic paint coatings and precise tube-to-wire welding ensure structural integrity and sustained heat exchange even during prolonged heatwaves common in Gulf states. However, actual system performance depends on the entire refrigeration circuit design, not just the condenser alone.<\/p>\n<p style=\"text-align: justify;\">Which refrigerants are compatible with Taojun wire tube condensers?<\/p>\n<p style=\"text-align: justify;\">Taojun wire tube condensers are compatible with R134a, R404a, and R22 refrigerants, covering a broad range of commercial refrigeration and air conditioning applications prevalent in Middle East markets. Internal cleanliness specifications including residual moisture, impurity, mineral oil, and chlorine limits ensure safe and efficient operation with each of these refrigerant types.<\/p>\n<p style=\"text-align: justify;\">How does sand and dust exposure affect wire tube condenser performance?<\/p>\n<p style=\"text-align: justify;\">Sand and dust accumulation reduces airflow across condenser coils and insulates wire surfaces, degrading heat dissipation. Contractors should specify condensers with adequate wire pitch of at least 5 mm to allow easier cleaning and verify anti-corrosion coatings that resist abrasion from airborne particulates. Installation design should also provide access for periodic cleaning.<\/p>\n<p style=\"text-align: justify;\">What certifications should a wire tube condenser manufacturer hold for Middle East projects?<\/p>\n<p style=\"text-align: justify;\">At minimum, manufacturers should hold ISO 9001 quality management certification. For projects in Saudi Arabia, UAE, or Qatar, additional compliance with local civil defense and municipality HVAC standards may be required. Always request test reports and material certificates with each shipment. A manufacturer with decades of production history, such as Taojun with its 38 years of experience, typically has well-established quality processes.<\/p>\n<p style=\"text-align: justify;\">How much energy can a wire tube condenser save compared to traditional condensers?<\/p>\n<p style=\"text-align: justify;\">High-quality wire tube condensers can deliver 15 to 20 percent energy savings by reducing compressor workload through superior heat dissipation. The 30 percent improvement in heat exchange efficiency translates directly into lower electricity consumption, which is a significant factor in regions with high cooling demand where air conditioning accounts for the majority of building energy use during summer months.<\/p>\n<p style=\"text-align: justify;\">What is the expected lifespan of a wire tube condenser in coastal Middle East environments?<\/p>\n<p style=\"text-align: justify;\">In coastal environments with high humidity and salt air exposure, wire tube condensers with electrophoretic paint anti-corrosion treatment can last up to 50 percent longer than untreated alternatives. Proper installation with adequate ventilation and periodic maintenance extends service life further. Contractors should also protect coating integrity at mounting points using isolators to prevent abrasion damage.<\/p>\n<p style=\"text-align: justify;\">Taojun HVAC Engineering Team<\/p>\n<p style=\"text-align: justify;\">The engineering team at Ningbo Taojun Refrigeration Equipment Co., Ltd. brings 38 years of wire tube condenser design and manufacturing expertise. Founded in 1988 and ISO 9001 certified, Taojun supplies condensers for refrigeration and air conditioning systems deployed worldwide. For technical inquiries and project specifications, visit the Taojun contact page.<\/p>\n<p><span style='font-size:18px !important;'>Media Contact<\/span><br \/><strong>Company Name:<\/strong> <a href=\"https:\/\/www.abnewswire.com\/companyname\/taojunhvac.com_177852.html\" rel=\"nofollow\">Ningbo Taojun Refrigeration Equipment Co., Ltd.<\/a><br \/><strong>Email:<\/strong> <a href=\"https:\/\/www.abnewswire.com\/email_contact_us.php?pr=what-middle-east-hvac-contractors-verify-before-ordering-wire-tube-condensers-for-desert-climate-installations\" rel=\"nofollow\">Send Email<\/a><br \/><strong>Country:<\/strong> China<br \/><strong>Website:<\/strong> <a href=\"https:\/\/www.taojunhvac.com\/\" target=\"_blank\" rel=\"nofollow\">https:\/\/www.taojunhvac.com\/<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.abnewswire.com\/press_stat.php?pr=what-middle-east-hvac-contractors-verify-before-ordering-wire-tube-condensers-for-desert-climate-installations\" alt=\"\" width=\"1px\" height=\"1px\" \/><\/p>\n","protected":false},"excerpt":{"rendered":"<p>Verify tube material is rolling-welded steel in the 4.76 to 8 mm diameter range for reliable brazing and pressure tolerance. Confirm low carbon steel wire diameter is between 1.2 and 1.6 mm with wire pitch of at least 5 mm &hellip; <a href=\"https:\/\/www.abnewswire.com\/pressreleases\/what-middle-east-hvac-contractors-verify-before-ordering-wire-tube-condensers-for-desert-climate-installations_826620.html\">Continue reading <span class=\"meta-nav\">&rarr;<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[401,410,403,404,416],"tags":[],"class_list":["post-826620","post","type-post","status-publish","format-standard","hentry","category-Business","category-Manufacturing-Industry","category-UK","category-US","category-World"],"_links":{"self":[{"href":"https:\/\/www.abnewswire.com\/pressreleases\/wp-json\/wp\/v2\/posts\/826620","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.abnewswire.com\/pressreleases\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.abnewswire.com\/pressreleases\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.abnewswire.com\/pressreleases\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.abnewswire.com\/pressreleases\/wp-json\/wp\/v2\/comments?post=826620"}],"version-history":[{"count":0,"href":"https:\/\/www.abnewswire.com\/pressreleases\/wp-json\/wp\/v2\/posts\/826620\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.abnewswire.com\/pressreleases\/wp-json\/wp\/v2\/media?parent=826620"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.abnewswire.com\/pressreleases\/wp-json\/wp\/v2\/categories?post=826620"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.abnewswire.com\/pressreleases\/wp-json\/wp\/v2\/tags?post=826620"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}