1 name definition<\/p>\n
SPCC<\/a> was originally the Japanese standard (JIS) “general use of cold rolled carbon steel sheet<\/a> and strip” steel name, now many countries or enterprises directly used to indicate their own production of similar steel. Note: similar grades are SPCD (cold-rolled carbon steel sheet and strip for stamping), SPCE (cold-rolled carbon steel sheet and strip for deep drawing), SPCCKSPCCCE, etc. (special steel for TV sets), SPCC4DSPCC8D, etc. (hard steel, used for bicycle rims, etc.), respectively, for different occasions.<\/p>\n 2 Components<\/p>\n Japanese steel (JIS series) in the grade of ordinary structural steel mainly consists of three parts of the first part of the material, such as: S (Steel) that the steel, F (Ferrum) that the iron; the second part of the different shapes, types, and uses, such as P (Plate) that the plate, T (Tube) that the tube, K (Kogu) that the tool; the third part of the characteristics of the number, generally the minimum tensile strength. Generally the minimum tensile strength. Such as: SS400 – the first S said steel (Steel), the second S said “structure” (Structure), 400 for the lower limit of tensile strength of 400MPa, the overall tensile strength of 400MPa for the general Structural steel with a tensile strength of 400MPa.<\/p>\n Supplementary: SPCC – cold rolled carbon steel sheet and strip for general use, equivalent to China Q195-215A grade. The third letter C is an abbreviation for cold Cold. Need to ensure that the tensile test, in the end of the grade plus T for SPCCT.<\/p>\n 3 steel classification<\/p>\n Japan’s cold rolled carbon steel plate<\/a> applicable grades: SPCC, SPCD, SPCE symbols: S – steel (Steel), P – plate (Plate), C – cold rolled (cold), the fourth C – common (common), D – stamping grade (Draw), E – deep drawing grade (Elongation)<\/p>\n Heat treatment status: A-Annealed, S-Annealed + Flat, 8-(1\/8) hard, 4-(1\/4) hard, 2-(1\/2) hard, 1-hard.<\/p>\n Drawing performance level: ZF- for punching parts with the most complex drawing, HF- for punching parts with very complex drawing, F- for punching parts with complex drawing.<\/p>\n Surface Finishing Status: D – Dull (rolls processed by grinding machine and then shot peened), B – Bright Surface (rolls processed by grinding machine).<\/p>\n Surface quality: FC-advanced finishing surface, FB-higher finishing surface. Condition, surface finish condition, surface quality designation, drawing grade (for SPCE only), product specification and size, profile accuracy (thickness and\/or width, length, unevenness).<\/p>\n Media Contact<\/span>
Company Name:<\/strong> Tianjin Ehong International Trade Co., Ltd.<\/a>
Email:<\/strong> Send Email<\/a>
Phone:<\/strong> 022-23862980
Address:<\/strong>Room 510, South Bldg., Block F, Haitai Information Plaza, No. 8, Huatian Road
City:<\/strong> Tianjin
Country:<\/strong> China
Website:<\/strong> https:\/\/www.ehongsteel.com\/<\/a><\/p>\n