How To Install The Stainless Steel Expansion Anchor?

Stainless steel expansion anchor is a common fastener used in construction, mechanical equipment and other fields. As a common installation, the correct installation method and safety of stainless steel expansion anchor has received a lot of attention. The following will introduce how to properly install the stainless steel expansion anchor from several aspects, such as the characteristics of the stainless steel expansion anchor, the preparation work before installation, precautions during installation, and common failures and maintenance.

 304 Stainless Steel Expansion Bolts

Stainless steel expansion anchors are corrosion resistant and have a relatively long service life. Its structure mainly consists of expansion body, ring and internal thread, and they are designed with many special considerations, such as making full use of the elastic deformation capacity of the material, and optimizing the installation process. Therefore, the correct installation of stainless steel expansion anchor is very important to ensure its service life and safety.

Before installing the stainless steel expansion anchor, some preparatory work is needed. Firstly, the installation location needs to be carefully measured and holes are drilled at the corresponding locations; secondly, the holes and orifices must be cleaned of debris such as scum, oil and dust to avoid affecting the anchor fixing effect; finally, the appropriate hole depth and diameter must be selected according to the requirements of the selected model.

In the process of installing the stainless steel expansion anchor, the following points need to be noted:

1. Choose a suitable hammer or rubber hammer and lightly strike the expansion anchor bolt to insert it into the hole.

2. After inserting, you need to keep it relaxed and adjust the tightening degree by turning the nut.

3. When the expansion anchor reaches a certain tension, it is necessary to continue to tighten the nut with a wrench until it is locked.

While tightening the expansion anchor, it is necessary to ensure the close contact between the expansion body and the anchor hole to avoid loosening.

In short, the correct installation of stainless steel expansion anchor is a necessary step to ensure its service life and safety. Before carrying out the installation, it is necessary to make adequate preparations and pay attention to all details during the installation process to avoid safety accidents. At the same time, regular maintenance is required in daily use to keep the stainless steel expansion anchor in good condition. 

Buy stainless steel anchor bolts from Aozhan Hardware Fasteners, factory supply, save 20% of your purchasing cost. At the same time, we will do our best to provide our customers with high quality bolts and competent nut suppliers. If you are interested, welcome to contact us at, we will send you a complete bolt catalogue and a free discount quotation.

Media Contact
Company Name: Nanning Aozhan Hardware Fastener Co., Ltd.
Email: Send Email
Country: China