USB 3.0 flash drive repair tool to Recover data from usb 3.0 flash drive due to usb 3.0 3.1 3.2 flash drive corrupted, not recognized, not working, not showing up windows 7 windows 10 pc, power failure, logical corrupted, not detected in bios.
USB 3.0 is the third major version of the Universal Serial Bus (USB) standard for interfacing computers and electronic devices. Among other improvements, USB 3.0 adds the new transfer rate referred to as SuperSpeed USB (SS) that can transfer data at up to 5 Gbit/s (625 MB/s), which is about ten times as fast as the USB 2.0 standard. SuperSpeed certified USB-C 3.1 Gen 1 cables will be able to operate at 10 Gbit/s (up from 5 Gbit/s), and SuperSpeed+ certified USB-C 3.1 Gen 2 cables will be able to operate at 20 Gbit/s (up from 10 Gbit/s).
USB 3.1 Gen 1, USB 3.1 Gen 1 has the same 5 Gbit/s SuperSpeed maximum data signaling rate as USB 3.0.
USB 3.1 Gen 2, USB 3.1 Gen 2 has a new 10 Gbit/s (1250 MB/s) SuperSpeed+ maximum data signaling rate—double that of USB 3.0.
Sometimes, when you connect usb flash drive into your pc runs Windows 7/10/8/XP/Vista, Windows OS prompts error message: “Drive X: is not accessible. The file or directory is corrupted and unreadable.” If you check the file system of the usb flash drive, it shows as RAW file system.
“X (C, D, E, F, G, H, I, etc.) is not accessible, The file or directory is corrupted and unreadable” is a pop-up message usually showing on various storage devices such as usb flash drive etc.
When “The file or directory is corrupted and unreadable” error message happens, you can not access your usb flash drive and data loss at most times.
So, to solve this case, three keys:
1. Use data recovery software to recover data.
2. Use CHKDSK to check the device.
3. Reformat the drive.
usb 3.0 flash drive data loss reasons, the common reasons are: usb flash drive says it needs to be formatted with the error “you need to format the disk in drive”, insufficient power supply, file system corrupted, damaged usb flash drive partition, system errors, logical damage, etc. To fix or repair corrupted usb flash drive, first need to exclude pc or windows system settings error, or usb flash drive driver problems, need to reload, or Device Manager to hide the device, need to open, or bios Set the usb flash drive disabled.
This kind of system problem, in the pc manual and other information can easily find the guide. Second, for any data storage device, including an usb flash drive, if there is a problem, the first thing to do is to restore the data, backup data, because for almost everyone, The files in the data storage device are more important than the device itself.
How to use usb 3.0 flash drive recovery software to recover data from corrupted usb flash drive?
“undelete” to recover deleted files from usb flash drive after Virus attack, Recycle bin clear, disk cleanup, Press shift del by mistake, permanently empty recycle bin, shift delete, accidentally deleted by a mistake.
“unformat” to recover data from adata kingston sandisk usb 3.0 flash drive repair tool after quick format, full format, accidentally formatted, reformatting, High-level formatting, Low-level formatting.
“Recover partition” to recover data from adata sandisk kingston usb 3.0 flash drive repair tool partition changed or corrupted or deleted
“Full Scan” – recover data from kingston sandisk adata usb 3.0 flash drive repair tool after showing an error, display as raw file system, unformatted, unknown partition, unpartitioned, needs to be formatted.